A Better Setup with a Four Ball Blade Putter
The concept of putting is as simple as it gets: you’re trying to put the golf ball in the hole. Simple and easy aren’t the same thing, however, especially when it comes to putting. Setting up correctly will improve your putting consistency. A proper setup leads to much better odds of a correct putting stroke. A four ball blade putter makes lining up the head properly easier.
The first thing you need to understand about a proper putting stroke is that it moves in an arc, not a straight line. Bear in mind-and this is very important-that the arc should be natural, not one that you must think about to perform accurately. It is always best to work toward being instinctive rather than mechanical and you’ll have better feel and distance control. This will give you more made putts and minimal three-putts.
Like all golf shots, putting begins at the setup position. If you setup to the golf ball properly you’ll be more likely to hit the golf ball squarely and play instinctively, rather than mechanically, on the golf course. Setup is best described by five lines at address. These five lines not only help you achieve a correct setup, they will enable you to fit for the right length shaft as well. A four ball blade putter can help you se when you’ve gotten it right. The five lines at address consist of:
1: Your forearms and the shaft are aligned with each other. The shaft and your forearms need to be on the same plane. Your arms can then move in unison with the shaft when you stroke. Grasp that four ball blade putter with your palms rather than fingers to set yourself on the path to optimum alignment.
2: Hands directly under shoulder line. Bow forward from your hips. Face the ground with your entire upper body, and your hands will end up under the shoulder line, free and clear of the body. Bend your elbows slightly. Don’t hold tension your arms or hands.
3. Your eyes must come to rest over the golf ball. Once you’re in your bowing forward stance, your eyes should rest over the golf ball. You’ll see the line better if your eyes are there or just inside the target line. The four ball blade putter with its unique alignment system will help make accurate setup and takeaway easier.
4. Balance your weight on the middle of your feet. Your eyes are now over the golf ball. Next, place your feet the correct distance away from the ball, so that you can feel you weight in the middle of your feet. If you’re standing too close to the ball, your weight will be on your heels. On the other hand, if you’re too far away, your weight will tend to rest on your toes.
5. Shaft aligned 90 degrees to the ground. Don’t lean the four ball blade putter shaft forward or backward at address. Leaning would change the built-in loft of the four ball blade putter. On the other hand, if you’re aligned 90 degrees to the ground, the face of your four ball blade putter will have about 4 degrees of loft, and this is what you need to get the proper roll. If you can’t help leaning forward at address, you will need to add loft to the four ball blade putter face to compensate for your lean. The alignment balls on the four ball blade putter can help you determine if you’ve compensated accurately.
Your putting stroke should be an arc. Practice until you can instinctively and accurately align up with these five lines at address, this will make it a lot more natural for you to stroke with the optimum arc. Even though the arc typically will tend to be small, it is easy to spot in some people because of the effort to keep the putter head straight back to straight through. No rocking of your shoulders as that will make your putter’s path less than ideal. Use these five lines by instinct to learn a better setup.
If you liked that, try these...
Homeschool Tips - Help on Making Homeschooling Easier for Parents
The Best Home Schooling Resource Online!
Thanks for visiting!
Subscribe to my RSS feed AND YOU WONT MISS A THING.